How to buy the best busbar at the lowest price

Many people believe that the price of a busway does not necessarily depend on the quality of the busway.When human beings are faced with huge loads requiring hundreds of thousands of strong currents, it is very important to choose safe and reliable conduction equipment.

Guangdong busbar connector must be checked regularly

Before checking the busbar components, it is necessary to stop the power to check the busbar system, completely cut off all power supply to the busbar components, use a multimeter to measure whether there is voltage in the conductor, and confirm that there is no power supply to the busbar system, so that it can be checked regularly. Prevent high voltage on the operator to cause bodily injury. When the busway is running for a long time, the temperature of the joints is regularly tested every year to rise, and the temperature of the joints does not exceed 40 degrees.

Matters to be noted in the horizontal and vertical installation of Guangdong bus ducts

Buses are increasingly replacing wire and cable in indoor low-voltage transmission trunking projects.It has been promoted in developed countries abroad and in Hong Kong and Macao in China.In Guangzhou, Guangdong Province, China, more than 90 per cent of the trunking to the floors of buildings of more than 12 floors use bus ducts; bus ducts should be used from 630KVA transformers to distribution cabinets.
*** Translated with www.DeepL.com/Translator (free version) ***

Guangdong bus ducts to detect the details of the failure of the method

Bus duct in the indoor low-voltage power transmission trunking project to replace the wire and cable.Popularised in developed countries abroad and in Hong Kong and Macao, China.For bus ducts say, busbar problems, as employees should be how to check the busbar, busbar inspection requirements are as follows

Five common ways to repair a busbar system

Modern high-rise buildings and large-scale workshops require huge amounts of electrical energy. In the face of such huge loads, it is necessary to choose safe and reliable conductive equipment, and the busbar system is a good choice.Busbar system is a kind of efficient power distribution device, especially suitable for increasingly high-rise buildings and large-scale factories economic and reasonable wiring needs. When the busway has a large deformation due to improper installation, the copper row of the guide rail will be deformed and stress, reaching the limit state, the guide rail will jump out of the wedge groove and fall off; when the copper row of the guide rail is connected loosely, the copper row of the guide rail will be deformed by the heat, and it will also fall out of the wedge groove.

Characteristics and application areas of Guangdong bus ducts

Many large factories are facing the problem that they can't work properly due to insufficient power supply, which will cause great loss to the enterprise.Bus duct power supply system as a new power supply system came into being, then what is the bus duct system?Here is a detailed introduction.